Painting Tips & Tricks
We all have tried it....painting! But here are a few helpful tips to remember....
When painting baseboard, some painters slip masking tape under the baseboard. But this is time-consuming and doesn't create a seep-proof seal between the baseboard and the carpet. Instead, press the tape against the baseboard, covering about 1/4 in. of the bottom edge. Press down hard on the carpet while you apply the tape. That way, the tape will hold the carpet down while you paint. Later, when you remove the tape, the carpet will rise and cover the unpainted edge of the baseboard.
Narrow Drop Cloths are Better
Large drop cloths work great if you're painting a ceiling, but they're overkill if you're only painting walls and trim. Drop cloth runners are usually 3 to 4 ft. wide and are much easier and safer to work with because you don't have to fold them several times. Folded drop cloths are easy to trip on, and nothing good results from tripping with an open paint can in your hand.
Set Your Tape
After you apply masking tape, run a putty knife, or a 5-in-1 tool, over it to “set” the tape to the trim. This bonds the tape to the surface and helps stop paint from seeping under the tape and up onto the trim.
Cut the Paint Before Pulling the Tape OffWhen you remove masking tape that has been left on too long, the tape can pull chunks of paint off with it. It's usually best to pull off the masking tape while the paint is relatively wet; however, if it does stay on too long, gently cut the tape along the line where the paint meets the trim. This prevents the paint from sticking to the tape and coming off the wall.
Remove the Fuzz
Some tools need cleaning even when they're brand new. Some new roller covers (usually the cheaper ones) have a layer of fuzz that detaches from the cover. The first time you load up a fuzzy roller, the paint mixes with the fuzz and creates small bumps on the wall. One way to remove the fuzz is to wrap masking tape all the way around the roller cover. When you pull the tape off, the excess fuzz will be pulled off along with it.
Tips and image from: Family Handy Man